ITC 560 Internet of Things

Task One

You have just joined as an IoT Architect at Ingenious IoT. The first project you have been tasked with is the setup of a demo IoT Smart Office, with a link to the company offices. The project is divided into 2 parts:
· Create a smart office with the criteria and devices given.
· Control these smart devices from the branch office which is in the same city
The Main Smart Office includes, but is not limited to the following smart devices:
· Ceiling Fan
· Lamp
· Front Door Lock                   
· Motion Detector
· Web Camera
· Smoke Detector
· Fire Sprinkler
· Window
· Carbon Dioxide Detector
· Anemometer (Wind Speed Detector)                                                                          
These devices are linked to a Wireless Router, which is linked via an Ethernet cable to a Cable Modem. The modem is connected to the Internet via an ISP known as Optras. All the devices registered on the Remote Server can be controlled locally by a Tablet which is also connected to the wireless network. There is a Remote Server connected to the Company's Cloud Cluster service (run by Sky Servers), as well as an external server that the Smart office uses for backups.              

Ensure that you add all necessary screenshots with the documentation as well as the packet tracer file to be presented to the manager for project approval.                                   

Build and configure a smart office. (Refer to the file on the Student Resources named Assignment_2_Help). Save the file as StudentID_Firstname_ITC560.pkt (using your own student ID and first name). A template exists in the Cisco Network Academy IOT Course.

All screenshots for each step with a brief explanation must be included in the document. Once the Assignment is complete, the student must embed the packet tracer file as an object in the word document as StudentID_Firstname_ITC560.pkt                                   

Part A
The main office is connected to the Internet Provider using a Cable Modem. Once that is in place, Add, connect, enable and configure the registration server, tablet and wireless router for the main site. The network must implement secure protocols and techniques.  You should define  a suitable addressing scheme and ensure that your devices get addresses via DHCP where appropriate. This represents your first office.

All the devices for the Main Smart Office as outlined above, should be represented in this environment.       
Create a DNS name server to resolve the names of the devices in this environment.  Use DNS wwwFirstName.com (where FirstName is your own first name) to access the connected devices                                   
Part B
Add a new branch office in the same city. Either move the same tablet to the branch office or use your smart phone and connect to the main smart office server. You can use any connecting and intermediary devices of your choice. Log on to the web browser on your tablet/smart phone and manage the devices.    
Use your tablet/smart phone to:                    

· Turn off the Sprinkler
· Turn off the ceiling fan
· Lock the door
· Dim the lamp
· Turn on the smoke alarm
· Turn on the motion detector
· Turn on the wind detector

Part C

For the final part of this task, embed the following logic in the main office When the motion detector, detects motion, turn on the lamp and the web camera to take a picture or video stream.
When the fire smoke detector, detects a fire, turn on the sprinkler. When the fire is gone, the sprinkler should stop. Ideally this should be implemented by first triggering a siren at a particular level and when that level is well and truely surpassed turning on the water. Pick appropriate levels when demonstrating the condition.When the carbon dioxide detector detects carbon dioxide, open the window. The window should be closed when the levels dissipate. Pick appropriate levels for CO2.